slewing bearing

The material pitch bearing rings is 42CrMo, the heat treatment adopts the overall quenching and tempering treatment, and the surface of the raceway is quenched. The force of pitch bearings is complex, and the impact and vibration are relatively large. Therefore, the bearing is required to withstand both impact and large load. The life of the wind turbine main engine is required to be 20 years, and the cost of bearing installation is relatively large, so the life of the yaw and pitch bearings is required to reach 20 years. The hardness of the bearing ring base is 240-280HB, which can withstand impact without plastic deformation. At the same time, the surface quenching hardness of the raceway reaches 55-62HRC, which can increase the contact fatigue life and ensure the service life of the bearing.

Excavator is one of the important equipment in modern engineering construction. The reason why the excavator can turn left and right in the work is inseparable from the credit of the slewing mechanism, which is one of the important components of the hydraulic excavator. The slewing mechanism is connected with the traveling device through a slewing bearing, and the slewing drive device makes the platform rotate relative to the traveling device, and drives the working device to rotate around its central axis of rotation. We are specialized in the production of engineering machinery slewing bearings, drive shafts and matched pinions. For some common model excavators slewing bearing, we have ready stock and can deliver within one week. Our company has a special quality testing laboratory, devoted to product design and development, product application and testing methods. At the same time, the company also has advanced production equipment and testing equipment to ensure that products have high performance, long life, low friction, high precision.

Excavator is one of the important equipment in modern engineering construction. The reason why the excavator can turn left and right in the work is because of the slewing mechanism, which is one of the important components of the hydraulic excavator. The slewing mechanism is connected with the traveling device through a slewing bearing, and the slewing drive device makes the platform rotate relative to the traveling device, and drives the working device to rotate around its central axis of rotation. We are specialized in the production of engineering machinery slewing bearings, drive shafts and matched pinions. For some common model excavators slewing bearing, we have ready stock and can deliver within one week. Our company has a special quality testing laboratory, devoted to product design and development, product application and testing methods. At the same time, the company also has advanced production equipment and testing equipment to ensure that products have high performance, long life, low friction, high precision.

Slewing ring is widely used in construction equipment like excavators. It is wear parts. We are specialized in the production of engineering machinery slewing bearings, drive shafts and matched pinions. If you need replacements of the steel balls, rollers or spacers, it is also available. For some common model excavators slewing bearing, we have ready stock and can deliver within one week. If you have old slewing bearing in hand, we can instruct you to measure the detailed size to make a professional drawing and then manufacture it for you. Our company has a special quality testing laboratory, devoted to product design and development, product application and testing methods. At the same time, the company also has advanced production equipment and testing equipment to ensure that products have high performance, long life, low friction, high precision.

The double row ball slewing bearing has three seat rings. The steel balls and isolators can be directly arranged into the upper and lower raceways. According to the stress conditions, the upper and lower rows of steel balls with different diameters are arranged. This kind of open assembly is very convenient. The bearing angle of the upper and lower arc raceway is 75 degrees. It can bear a great deal of axial force and overturning moment. When the radial force is greater than 0.1 times the axial force, the raceway must be specially designed. The axial and radial dimensions of the double row ball slewing bearing are relatively large and the structure is fastened. It is especially suitable for handling tower cranes, truck cranes and other loading machines that require medium or above diameters, military products. The double-row four-point contact ball slewing bearing structure is similar to the single-row ball slewing bearing, the difference is that it uses two rows of steel balls as rolling elements, the two rows of steel balls have the same size, and a single isolation block is set between the steel balls. The inner and outer rings are integral, and the steel balls are loaded by plugging the holes. It requires a product for a heavy-duty, radially constrained host. Double row different diameter ball slewing bearing structure is characterized by the upper and lower double-row steel balls, inner and outer rings, isolation blocks and lubrication and sealing devices. However, the double-row different diameter slewing bearing is a three-piece slewing bearing, and its structure is more complicated.

Slewing bearing is an important "joint" of the crane. Various loads and moments on the working device need to be transmitted to the chassis through the slewing bearing. Because the slewing bearing is overloaded, it is also the part where the crane is prone to failure, so it is necessary to install a new slewing bearing after long-term use. Truck cranes, crawler cranes and other heavy construction cranes are usually using large single row four-point contact ball slewing ring bearing. This type of slewing bearing can bear larger axial load, radial load and tilting moment, enabling crane to lift heavy loads stably and reliably. To improve the manufacturing accuracy and working life of the slewing bearing, we focus on the heat treatment process, raceway quenching to prevent quenching cracks on the surface of the raceway. For high precision products, precise grinding is used to effectively control the parameters of ring ellipse, wall thickness and flatness, so as to ensure that the precision of finished products meets the requirements of standards or customer drawings. So our slewing bearings are with features of high precision, long working life and durable to use.

Quality comes from details, tailored for you. We can customize various non-standard slewing bearings for you according to your specific requirements. Drawing or sample can be customized. Or if you have old bearing in hand, we can instruct to measure it. We have been in slewing bearing manufacturing industry for over 20 years and have undertook all kinds of non-standard products like segmental slewing bearing, special-shaped slew bearing, special structure swing bearing, stainless steel bearing with ceramic ball, double row cylindrical roller slew ring and etc. And for special working condition, we can do blackening, phosphating, galvanizing, sandblasting, nitriding and other surface treatments. We have experienced engineer and research team to support our implement personalized optimization design for different customers and flexible production to meet customers’ requirements.

Slewing bearing is widely used in excavator equipment. It belongs to wear parts. We are specialized in the production of engineering machinery slewing bearings, drive shafts and other gear parts. For some common model excavators’ slewing bearing, we have ready stock and can deliver within one week. If you have old slewing bearing in hand, we can instruct you to measure the detailed size to make a professional drawing and then manufacture it for you.

Port hoisting machinery generally includes portal cranes, ship unloaders, floating cranes, etc., commonly used single-row four-point ball type, three-row roller type and double-row ball type slewing ring bearings. Port cranes usually use three-row roller slewing bearings with internal or external teeth with a diameter of 4 meters to withstand high overturning moments. Our company often provides slewing bearings in this field, such as single-row ball type, 011/012.60.2000, 011/012.60.2240, 011/012.60.2500, 011/012.60.2800, 011/012.60.3150, etc., three-row roller type, etc. Slewing bearings include 131/132.45.2500, 131/132.45.2800, 131/132.50.3150, 131/132.50.3550, 131/132.50.4000, 131/132.50.4500, etc., as well as double-row ball slewing bearings 021/022.50 .2500, 021/022.50.2800, etc., are our main advantage products. If non-standard customization is required, our company can provide technical support such as selection, design, calculation, etc., you can call for details.