slew bearing

In the production process of slewing ring bearing, whole process inspection is implemented strictly to ensure that each set of products are qualified. For high-precision products, precise grinding is used to effectively control the parameters of ring ellipse, wall thickness and flatness, so as to ensure that the precision of finished products meets the requirements of standards or customer drawings.

Our company can design, customize and produce according to customer needs. As a clean and renewable energy source, wind power has been widely used around the world. In wind turbines, slewing bearings are used to support the wind wheel and enable it to rotate with changes in wind direction, thereby maximizing the capture of wind energy and improving power generation efficiency.

1.Capable of withstanding various loads, with the highest load-bearing capacity among the four structures 2.The axial and radial dimensions are relatively large, and the structure is sturdy 3.Especially suitable for heavy-duty machinery that requires larger diameters, such as cranes, ladle turntables, and other machinery

Three-row roller bearings can bear various loads at the same time. They have the largest load-bearing capacity among the four products. They have larger shaft and radial dimensions and a solid structure. They are especially suitable for heavy machinery requiring larger diameters.

Double row ball slewing bearing is a special kind of slewing bearing. Its design principle is as follows: Structural composition: Double volleyball slewing bearing consists of two volleyball balls and inner and outer rings. Volleyball balls are placed between the inner and outer rings and can withstand axial and radial loads. The inner and outer rings are fixed and can rotate relative to each other.

1. With good moment, thrust and radial loading capacity. 2. Suitable for light to medium duty. 3. Easy installation 4. light weight and thin section 5. Flexible rotation

The single row cross roller slewing bearing is made of two seat rings. It is featured with compact structure, light weight, high manufacturing accuracy, small assembly gap and high requirement for installation accuracy. Rollers are 1:1 cross- arranged through spacers. It can bear axial force, overturning moment and large radial force at the same time. Compared with ball slewing ring, the axial and radial clearance of the cross roller slewing ring is smaller than single row ball slewing bearing. While the rotating is not so flexible as the single row ball slewing bearings, usually it is used for some higher precision applications. It is widely used in lifting transportation, construction machinery, military product, robots, medical equipment, grinding and drilling machine etc. Standard material we adopt is 50Mn and 42CrMo. Other customized material is also acceptable. We support models selection based on your application; teeth quenching and grinding; customized surface treatment like Blackening, phosphating, galvanizing, sandblasting and etc.

Single row four point contact ball slewing bearing 01 series is a standard model series in China. It is made of two seat rings. The balls and the raceway are with four points contact, via which the axial force, radial force and resultant moment is born simultaneously. Outer Diameter is from 280mm to 4726mm. Most models slewing ring are with ready stock or semi-finished material stock, which can deliver out within 15 days. Standard material we adopt is 50Mn and 42CrMo. Other customized material is also acceptable. We support models selection based on your application; teeth quenching and grinding; customized surface treatment like Blackening, phosphating, galvanizing, sandblasting and etc. In the production process of slewing ring bearing, whole process inspection is implemented strictly to ensure that each set of products are qualified. For high-precision products, precise grinding is used to effectively control the parameters of ring ellipse, wall thickness and flatness, so as to ensure that the precision of finished products meets the requirements of standards or customer drawings. This series models are with advantage of compact design, flexible rotating and light weight. It is widely used on rotary conveyor, welding arm and positioner, light/medium duty cranes, excavators and other engineering machines. Please feel free to tell us the application you use and we can help you choose the proper model and offer you a professional solution as soon as possible.

Excavator is one of the important equipment in modern engineering construction. The reason why the excavator can turn left and right in the work is inseparable from the credit of the slewing mechanism, which is one of the important components of the hydraulic excavator. The slewing mechanism is connected with the traveling device through a slewing bearing, and the slewing drive device makes the platform rotate relative to the traveling device, and drives the working device to rotate around its central axis of rotation. We are specialized in the production of engineering machinery slewing bearings, drive shafts and matched pinions. For some common model excavators slewing bearing, we have ready stock and can deliver within one week. Our company has a special quality testing laboratory, devoted to product design and development, product application and testing methods. At the same time, the company also has advanced production equipment and testing equipment to ensure that products have high performance, long life, low friction, high precision.