Gear Ring

In dryers and dryers, the role of the large gear ring is crucial, usually used to transmit power and support rotating components. Through reasonable material selection, design, and maintenance, the stable and reliable performance of the large gear ring can be ensured, providing strong support for the long-term operation of the equipment.
The large gear ring transmits the power of the motor to the rotating parts of the equipment through meshing with the small gear, thereby driving the operation of the equipment. The large gear ring is generally made of high-strength materials, such as cast steel or alloy steel, to ensure that it can withstand the strong forces and high temperatures generated during equipment operation. The accuracy and wear resistance of the large gear ring directly affect the service life and efficiency of the equipment.

1.A spur gear is a simple gear with parallel teeth and a gear axis. It is used to transmit power between parallel shafts. Spur gears are primarily used to reduce speed and increase torque. Spur gears have the advantages of simple design, easy manufacturing, low cost, high efficiency, and can achieve various transmission ratios, but the disadvantage is that they are noisy.
Helical gears have teeth that are inclined to the axis of the gear. For the same tooth width, helical gears have longer teeth than spur gears. Therefore, more power can be transferred between parallel shafts than with spur gears. The advantages of helical gears are higher load carrying capacity and contact ratio compared to spur gears. Smoother and quieter than spur gears. and have good accuracy levels. The disadvantage of helical gears is that they are less efficient compared to spur gears. The helix angle also increases the axial thrust on the shaft.
2.Our company can produce different type pinion gears such as spur gear, helical gear, worm gear according to the customer's drawing and requirements. Our product is highly appreciated amongst customers for its dimensional accuracy, excellent strength and high performance. Teeth quenching, teeth grinding and surface treatment like oxide, nitriding, sandblasting are also available.

1.Gears are mechanical components with teeth on the rim that can continuously mesh to transmit motion and power. The application of gears in transmission appeared very early.
2.According to specifications or sizes, gear models are divided into standard and non-standard;According to different measurement units at home and abroad, gear models are divided into two types: metric and imperial.

Our company has professional technical personnel, complete equipment, and many years of production experience. We have cooperated with many customers both domestically and internationally, and have high quality assurance. Gears can be produced according to the drawings provided by customers, including spur gears, helical gears, herringbone gears, etc. We welcome inquiries.

1.Our company mainly produces non-standard mechanical products such as rotary bearings, gear rings, and shafts, which can be customized according to customer requirements. Gear and shafts can produce structures such as straight teeth, helical teeth, and herringbone teeth. Rotary bearings have external teeth, internal teeth, and no teeth. We have cooperated with many new and old customers both domestically and internationally,The factory is fully equipped with professional workers and technical teams, and a complete sales team provides one-on-one service in terms of service. and we believe we welcome inquiries.
2.A spur gear is a simple gear with parallel teeth and a gear axis. It is used to transmit power between parallel shafts. Spur gears are primarily used to reduce speed and increase torque. They are also used at high speeds in some consumer products. The following are the applications of spur gears in several products: mixers, washing machines, automobiles, bicycles, mechanical clocks, etc.
Helical gears have teeth that are inclined to the axis of the gear. For the same tooth width, helical gears have longer teeth than spur gears. Therefore, they can transmit more power between parallel shafts than spur gears.
Helical gears are used to transmit heavy loads between parallel shafts at very high rotational speeds. The following are the applications of helical gears in various products. Automotive gearboxes, printing and other machinery, conveyors and elevators, factory automation, etc.
Double helical gears have opposing helical teeth with grooves between them. Herringbone gears, on the other hand, have no grooves. Both gear types are used to transmit power between parallel shafts. Compared with helical gears, herringbone gears and double helical gears have the advantage of balancing bidirectional axial thrust. Therefore, they are used in applications with high load-carrying capacity requirements, such as differentials and heavy machinery.

1.A herringbone gear, a special type of double helical gear, is a special type of gear that is a side-by-side (not face-to-face) combination of two helical gears in opposite directions. Viewed from the top, each of the gear's spiral grooves looks like the letter V, and many of the spiral grooves together form a herringbone pattern. Unlike helical gears, herringbone gears do not create additional axial loads.
Like helical gears, they have the advantage of delivering power smoothly because more than two teeth are in mesh at any one time. Their advantage over helical gears is that half of the side thrust is balanced by the other half of the side thrust. This means that herringbone gears can be used in torque gearboxes without the need for extensive thrust bearings. The herringbone gear was therefore an important step in the introduction of steam turbines for ship propulsion.
Precision herringbone gears are more difficult to manufacture and therefore more expensive than equivalent spur or helical gears, so they are often used in heavy machinery.
2.Our company mainly produces non-standard mechanical products such as rotary bearings, gear rings, and shafts, which can be customized according to customer requirements. Gear shafts can produce structures such as straight teeth, helical teeth, and herringbone teeth. Rotary bearings have external teeth, internal teeth, and no teeth. We have cooperated with many new and old customers both domestically and internationally,The factory is fully equipped with professional workers and technical teams, and a complete sales team provides one-on-one service in terms of service. and we believe we welcome inquiries.

1.Our company mainly produces non-standard mechanical products such as rotary bearings, gear rings, and shafts, which can be customized according to customer requirements. Gear shafts can produce structures such as straight teeth, helical teeth, and herringbone teeth. Rotary bearings have external teeth, internal teeth, and no teeth. We have cooperated with many new and old customers both domestically and internationally,The factory is fully equipped with professional workers and technical teams, and a complete sales team provides one-on-one service in terms of service. and we believe we welcome inquiries.
2.Gears are widely used in various mechanical transmission systems, including automobiles, aviation, rail transit, engineering machinery, ships, wind power, robots and other fields. As an indispensable component in the mechanical transmission system, gears have always been one of the core technologies in the field of mechanical manufacturing.

1.A combination of left and right helical gears with the same helix angle is called a double helical gear, which transmits rotational motion between parallel axes.
2.Double helical gears and herringbone gears are the same type of gear, but those with grooves between the left and right helical teeth are called double helical gears, those without grooves

1.Bevel gears are used to transmit motion and power between two intersecting axes. In general machinery, the intersection angle between the two axes of bevel gears is equal to 90° (but it may not be equal to 90°). Similar to cylindrical gears, bevel gears have indexing cones, tip cones, root cones and base cones. The cone has a big end and a small end, and the circles corresponding to the big end are called the graduation circle (its radius is r), the tooth tip circle, the tooth root circle and the base circle. The movement of a pair of bevel gears is equivalent to pure rolling of a pair of pitch cones.
2.Our company has many years of manufacturing and production experience, complete equipment, and a professional technical team. We have cooperated with many new and old customers at home and abroad for many times. We can design and produce according to the required drawings provided by customers to meet customer needs. We also have a pair of First-class service, please believe us. If you have needs, you can find out first. Customers are welcome to consult.